SharkSkin 100% Acrylic Exterior Patio Stain 3.78L 72500 SEMI-TRANSPARENT

-Tried natural oils, formulated according to standards
VOCs, for long-lasting protection.
-One-coat application on wooden surfaces
existing or new.
-Available in a range of 6 mixed colors
factories that showcase the beauty of the wood and leave
to reveal its natural appearance through the dye.
-Hydrophobic – reduces the amount of water passing through the dye
and slows down the degradation of the wood.
-Transparent iron oxide pigments offer a
maximum protection against the sun's harmful UV rays
and help to reduce wood degradation.
-A combination of alkyd resins and durable oils
which offer a calculated blend of deep penetration and
durability for longevity and protection
maximum outdoor wooden surfaces.
- Uniform application without overlapping marks
-Its flexible, high-solids formula penetrates
depth and shape a non-film-forming barrier that does not peel
does not blister or crack.
-Protects against mold and algae on the surface of
the stain.
-Formulated with fewer volatile solvents than stains
classic semi-transparent.

Horizontal – Terraces, pool and spa surrounds, benches, stairs and railings, existing or new.
Verticals – Cladding, outdoor furniture, woodwork, trellises, doors, steps, timber frames and fences.

Surface preparation is important. Surfaces must be clean, dry, and free of dirt, grease, soap scum, dust, and other contaminants. Remove all loose paint from previously painted surfaces. Previously painted surfaces should be washed with 3 tablespoons of TSP in one gallon of warm water. Rinse and allow the surface to dry completely before sanding with 80- to 120-grit sandpaper. Remove sanding dust before applying paint. Do not apply if the temperature is below 10°C (50°F).
No primer is required on new wood surfaces and previously painted wood surfaces if they are properly primed.
For new balconies, it is advisable to wait 2 to 4 weeks before staining. For pressure-treated wood, a minimum of 4 weeks is required.
Important note: If your patio has a recurring paint or stain problem and the underside of your patio isn't protected by a primer or anti-corrosion coating, our product may not be durable. A fresh coat of the product will not stop the spread of rot. Damaged boards must be replaced before applying the product.
Do not apply if the patio is in direct sunlight or 6 hours before and after rain. The wood temperature must be below 35°C before applying the product.

SharkSkin wood stain is a high-quality product designed to protect and beautify exterior wood surfaces, such as patios, decks, and siding. Developed by Cloverdale Paint, this 100% acrylic stain uses a water-based hybrid technology, providing superior adhesion, increased durability, and resistance to cracking, peeling, and blistering.