SamaN Gel Natural Oil-Based Gel Dye

A single layer
Low odor
Touch dry in 1 hour

Flooring, Veneers, Kitchen Cabinets, Woodwork, Mouldings, Furniture. Suitable for use on wood, metal and fibreglass.

The surface to be stained (wood, metal or fiberglass) must be clean, dry and free of any dirt in order to allow the stain to adhere or penetrate well.

Ensure that the surface or piece to be stained is properly sanded with 120 to 150 grit sandpaper.

Simply pour a small amount of stain onto a sponge and rub in the direction of the wood grain (for application, you can use the SamaN stain application kit).

Then wipe off the excess with a soft, clean cloth.

We suggest applying the dye in small sections at a time, to prevent the dye from drying out between applications.

Once the application is complete, to seal and protect your work, you can use clear finishes such as SamaN's water-based varnish or SamaN's hybrid oil varnish, available in matte, satin, semi-gloss and gloss.

Always stir the stain well before application. The surface to be stained must be clean, dry, and free of wax, grease, dirt, and dust so that the stain adheres or penetrates properly.

It is always best to test on an inconspicuous area to ensure that the color and finish achieved are as desired. The final result will depend on the natural color of the wood species.