WeatherOne 100% Acrylic Outdoor Deck Stain 3.78 L 72303 OPAQUE
WeatherOne 100% Acrylic Outdoor Deck Stain 3.78 L 72303 OPAQUE

WeatherOne 100% Acrylic Outdoor Deck Stain 3.78 L 72303 OPAQUE

Cloverdale

$64.99

WeatherOne 100% Acrylic Solid Stain is Cloverdale Paint's highest quality exterior acrylic stain. Formulated with the latest acrylic technology, extra solids, and a mildew inhibitor to slow the growth of mold and mildew on the stain's surface, it is ideal for vertical wood siding, wood composites, shingles, trim, and fascia.

This product also offers superior hiding and adhesion properties.


paiement 2.jpg__PID:79b3a6a2-94cc-4fef-b090-dcaed86c439e
Pouvoir couvrant :
    Covers 350 to 400 square feet.
Temps de séchage :
    To touch: 45 min / To repaint: 4 to 6 hours
Nettoyage des outils :
    Hot soapy water
Composition:
    100% acrylic
Utilisation recommandée :
    • Fences
    • Railings
    • Guardrails
    • Composite woods
    • Shingles
    • Trim and fascia
Préparation de surface
    Surface preparation is important. Surfaces must be clean, dry, and free of dirt, grease, soap scum, dust, and other contaminants. Remove all traces of loose paint from previously painted surfaces. Previously painted surfaces should be washed with 3 tablespoons of TSP in 4 liters of warm water. Rinse and allow to dry before sanding with 80-120 grit sandpaper. Remove sanding dust before applying paint. Do not apply if the temperature is below 10°C.
    No primer is required on new wood surfaces or previously painted wood surfaces if properly primed.
    For new decks, we recommend waiting 2 to 4 weeks before staining. For pressure-treated wood, a minimum of 4 weeks is required.
    Important note: If your deck has a recurring paint or stain problem and your undercoat is not protected with a primer or stain repellent, our product may not be durable. A new coat of product will not prevent rot from spreading. Damaged boards must be replaced before applying the product.
    Do not apply if the deck is exposed to direct sunlight or 6 hours before or after rainfall. The wood temperature must be below 35°C (95°F) for product application.
Caractéristiques:
    • 100% acrylic, allows the substrate to breathe.
    • Self-priming on most woods.
    • Its higher solids content ensures increased hiding, coverage, and durability.
    • Its content of Environment Canada-approved anti-mold agents prevents the growth of mold and algae on the coating's surface.
    • Low VOC content, low odor, and reduced environmental impact. - Rich, designer finish for long-lasting color and protection. • 15-year limited warranty.
Fiche technique anglais :
Image Promo Front
Image Promo Dos